WR36DH

MULTI VOLT(36V) Cordless Impact Wrench WR36DH Overview Best in Class* Tightening & Loosening Performance [Test Conditions]M12 x 110mm coach bolt into lauan material with a prepared hole 10mm in diameter. [Test Conditions]M20(F10T) high-strength bolt tightened at 600N・m. As of October 2022. Among cordless Impact Wrench with a tightening torque around 300Nm made by leading power tool manufacturers. (Surveyed by Koki Holdings.) Auto Stop Modes Prevent Over-tightening The tool comes with four Auto-Stop modes for a variety of applications and will stop after a preset amount of time has passed to prevent over-tightening of bolts. 1 2     3         4     Indicator Lamp Maximum Unloaded Speed 1,200 / min 1,800 / min 2,400 / min 3,000 / min Auto Stop Time Approx. 0.5 sec. Approx. 1.0 sec. Uses (For temporary tightening etc.) Small diameter bolts Vehicles wheel nut or piping Heavy machinery or steel frame The correct tightening torque depends on the material, size and class of the bolt. Make a test fastening to adjust the mode setting to suit the bolt. Reverse Rotation Auto-Slow Function to Suppress the Dropping of Nuts It assists in preventing dropping nuts by automatically stopping at the set time, or automatically changing speed to the designated rotation speed. Effective only when the switch is pulled to the maximum extent. IP56 Dust and Water Resistant* Thanks to the unique design of dust-protective cooling windows and fully plastic coating on some important inner parts, this product conforms to IP56 protection class ratings (dust and water resistance) for electrical equipment as stipulated by the international IEC regulations. The equipment has been designed to withstand the effects of dust and water, but there is no guarantee that it will not malfunction. Do not use or leave the equipment in locations where it is subject to excessive amounts of dust, or in locations where it is submerged in water or subject to rainwater. (Only the main unit conforms to the IP56 protection class ratings when equipped with a battery.) Optional Color Metal Plates in 5 Colors to Customize the Tool Specifications Battery Voltage 36V Capacity Ordinary Bolt M10 – M20 High-Tension Bolt M10 – M16 Square Drive 12.7mm Maximum Tightening Torque 380Nm Nut Busting Torque 700Nm Impact Modes 8modes No-load rotation speed Mode 4 0 – 3,000 / min Mode 3 0 – 2,400 / min Mode 2 0 – 1,800 / min Mode 1 0 – 1,200 / min Impact Rate Mode 4 0 – 4,100 / min Mode 3 0 – 3,200 / min Mode 2 0 – 2,400 / min Mode 1 0 – 1,600 / min Overall Length 144mm Weight*1 1.3 kg (Without battery) 2.3 kg (BSL36B18X)*2 Standard Accessories*3 2 Batteries (BSL36A18X), Charger(UC18YSL3), Battery Cover, Carrying case Weight: according to EPTA-Procedure 01/2014. Sold separately Standard accessories vary by country or area Please contact local dealers for product availability and product details. New Products Li-ion Cordless Tools Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Brushless Motor Tools DC (cordless) AC (corded) DC (cordless) AC (corded) Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting DC (cordless) AC (corded) DC (cordless) AC (corded) Drilling Demolishing Drilling Demolishing Global Network Technical Service & Support Global Network Technical Service & Support BEWARE OF NON-US SPECIFICATION PRODUCTS IN THE US BEWARE OF NON-US SPECIFICATION PRODUCTS IN THE US Digital Catalog All Posts Digital li-ion Uncategorized   Back abc Digital Catalog

WR36DG

MULTI VOLT(36V) Cordless Impact Wrench WR36DG Features Ergonomic design increases precision and reduces user fatigue Auto-stop/Auto-slow function prevents bolts from being over-tightened Reverse rotation auto-slow feature means bolts don’t get overtightened IP56 rated for resistance to both dust and water Specifications Max. Bolt M12 – M33 Max. HT Bolt M10 – M27 Drive 12.7mm (1/2”) square Tightening Torque 1400Nm Loosening Torque 2100Nm Battery voltage 36V No load speed: Mode 4 / Mode 3 0-1500/min / 0-1200/min Mode 2 / Mode 1 0-900/min / 0-600/min Full Load Impact rate: Mode 4 / Mode 3 0-2600/min / 0-2200/min Mode 2 / Mode 1 0-1900/min / 0-1600/min Dimensions (L x H) 221 x 290mm Weight 3.9kg with BSL36A18 WR36DGW2ZBody onlyBelt hookStackable system case 3GTIN 496637407774 PDF :  1,843KB Please contact local dealers for product availability and product details. New Products Li-ion Cordless Tools Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Brushless Motor Tools DC (cordless) AC (corded) DC (cordless) AC (corded) Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting DC (cordless) AC (corded) DC (cordless) AC (corded) Drilling Demolishing Drilling Demolishing Global Network Technical Service & Support Global Network Technical Service & Support BEWARE OF NON-US SPECIFICATION PRODUCTS IN THE US BEWARE OF NON-US SPECIFICATION PRODUCTS IN THE US Digital Catalog All Posts Digital li-ion Uncategorized   Back abc Digital Catalog

WR36DF

MULTI VOLT(36V) Cordless Impact Wrench WR36DF Features Ergonomic design increases precision and reduces user fatigue Auto-stop/Auto-slow function prevents bolts from being over-tightened Reverse rotation auto-slow feature means bolts don’t get overtightened IP56 rated for resistance to both dust and water IP56 Dust and Water Resistant* Thanks to the unique design of dust-protective cooling windows and fully plastic coating on some important inner parts, this product conforms to IP56 protection class ratings (dust and water resistance) for electrical equipment as stipulated by the international IEC regulations.   The equipment has been designed to withstand the effects of dust and water, but there is no guarantee that it will not malfunction. Do not use or leave the equipment in locations where it is subject to excessive amounts of dust, or in locations where it is submerged in water or subject to rainwater. (Only the main unit conforms to the IP56 protection class ratings when equipped with a battery.) Specifications Max. Bolt M12 – M36 Max. HT Bolt M10 – M27 Drive 3/4” Tightening Torque 1900Nm Loosening Torque 2400Nm Battery voltage 36V No load speed: Mode 4 / Mode 3 0-1500/min / 0-1200/min Mode 2 / Mode 1 0-900/min / 0-600/min Full Load Impact rate: Mode 4 / Mode 3 0-2600/min / 0-2200/min Mode 2 / Mode 1 0-1900/min / 0-1600/min Dimensions (L x H) 221 x 290mm Weight 3.9kg WR36DFW2ZBody onlyBelt hookStackable system case 3GTIN 4966376407644 PDF :  1,945KB Please contact local dealers for product availability and product details. New Products Li-ion Cordless Tools Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Brushless Motor Tools DC (cordless) AC (corded) DC (cordless) AC (corded) Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting DC (cordless) AC (corded) DC (cordless) AC (corded) Drilling Demolishing Drilling Demolishing Global Network Technical Service & Support Global Network Technical Service & Support BEWARE OF NON-US SPECIFICATION PRODUCTS IN THE US BEWARE OF NON-US SPECIFICATION PRODUCTS IN THE US Digital Catalog All Posts Digital li-ion Uncategorized   Back abc Digital Catalog

WR36DE

MULTI VOLT(36V) Cordless Impact Wrench WR36DE Specifications and others Runtime per Charge Specifications Leaflet(PDF) Powerful, Best-in-Class*1 Torque Easy to Use, Compact & Lightweight Design WR36DE   Max. Torque 770Nm*2Weight 2.6kg   WR18DSHL   Max. Torque 480Nm*3Weight 3.4kg As of May 2021, among 36V cordless impact wrenches made by leading power tool manufacturers. (Survey by Koki Holdings) When tightening an M24 high-tension bolt (grade 10.9) for 10 seconds with a hexagonal socket. When tightening an M22 high-tension bolt (F10T) for 10 seconds with a hexagonal socket. Best in Class*1 Speed Helps You Get the Job Done Faster Speed Comparison*2   Time needed to loosen an M24 (grade 10.9) bolt tightened at 850Nm Time needed to loosen an M27 (F10T) bolt tightened at 1,050Nm As of May 2021, among 36V cordless impact wrenches made by leading power tool manufacturers. (Survey by Koki Holdings) The values shown are for reference purposes and may vary according to the workpiece materials and other operating conditions. Auto Stop Modes Prevent Over-tightening The tool comes with four Auto-Stop modes for a variety of applications and will stop after a preset amount of time has passed to prevent over-tightening of bolts. 1 2 3 4 Display Lamp Rotation Speed 1,500/min 1,800/min 2,100/min 2,400/min Auto Stop Time Approx. 0.5 sec. Approx. 1.0 sec. Approx. 1.5 sec. Approx. 2.0 sec. Use Pre-tightening of wheel nuts or pipes Pre-tightening bolts in steel frame assembly Pre-tightening bolts on heavy machinery / bridges The correct tightening torque depends on the material, size and class of the bolt. Make a test fastening to adjust the mode setting to suit the bolt. IP56 Dust and Water Resistant* Thanks to the unique design of dust-protective cooling windows and fully plastic coating on some important inner parts, this product conforms to IP56 protection class ratings (dust and water resistance) for electrical equipment as stipulated by the international IEC regulations.   The equipment has been designed to withstand the effects of dust and water, but there is no guarantee that it will not malfunction. Do not use or leave the equipment in locations where it is subject to excessive amounts of dust, or in locations where it is submerged in water or subject to rainwater. (Only the main unit conforms to the IP56 protection class ratings when equipped with a battery.) Runtime per Charge* Work Ah Runtime per Charge* Tightening bolts(1.5 sec. per bolt) M16 x 55 (F10T) 2.5Ah Approx. 240 Bolts The values shown are for reference purposes and may vary according to the workpiece materials and other operating conditions. Specifications Capacity Ordinary Bolt M10 – M24 High Tension Bolt M10 – M20 Square Drive 12.7mm Tightening Torque 770Nm Nut Busting Torgue 1,050Nm Battery Voltage 36V No Load Speed 4 0 – 2,400/min 3 0 – 2,100/min 2 0 – 1,800/min 1 0 – 1,500/min Impact Rate 4 0 – 3,400/min 3 0 – 3,000/min 2 0 – 2,600/min 1 0 – 2,200/min Overall Length 169mm Weight*1 2.6kg (with BSL36A18)2.9kg (with BSL36B18)*2 Standard Accessories*3 2 Batteries (BSL36A18), Charger (UC18YSL3), Carrying Case, Battery Cover According to EPTA-Procedure 01/2014. Sold separately. Standard accessories vary by country or area. PDF :  664KB Please contact local dealers for product availability and product details. New Products Li-ion Cordless Tools Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Brushless Motor Tools DC (cordless) AC (corded) DC (cordless) AC (corded) Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting DC (cordless) AC (corded) DC (cordless) AC (corded) Drilling Demolishing Drilling Demolishing Global Network Technical Service & Support Global Network Technical Service & Support BEWARE OF NON-US SPECIFICATION PRODUCTS IN THE US BEWARE OF NON-US SPECIFICATION PRODUCTS IN THE US Digital Catalog All Posts Digital li-ion Uncategorized   Back abc Digital Catalog

WR36DB

MULTI VOLT(36V) Cordless Impact Wrenches WR36DB WR36DB12.7mm(1/2″) Square Drive The combination of the high power output MULTI VOLT battery and high efficiency brushless motor delivers power and torque equivalent to an electric (AC) model*1 Tightening Torque*2   When tightening a M30 high-tension bolt using a hex. socket for 3 seconds. Nut-Busting Torque*2   WR36DA: 1,800NmWR36DB: 1,650Nm Runtime per Charge*2（With the BSL36A18 battery）When tightening M24 x 80 high-tension bolts (3 sec. per bolt) WR36DA: Approx. 95 high-tension boltsWR36DB: Approx. 100 high-tension bolts Compared to the WR25SE corded impact wrench. The values are for reference purposes. They vary depending on the material and operating conditions. Compact and Lightweight for Ease of Use Compact and Lightweight for Ease of Use Tightening Mode Settings Mode Low1 Low2 Medium High Tightening ModeIndicator Lamp Applications Light Load Middle Load Heavy Load Car maintenance/Erecting and dismantling scaffolding Bolting and unboltingpipe flanges/Assembly of conveyors Bolting steel beams/Heavy equipment maintenance The tightening torque depends on the material, size and class of the bolt. Make a test fastening to adjust the mode setting to suit the bolt. Compact and Lightweight for Ease of Use Work Ah Performance per Charge* Concrete Drilling(60mm in Depth) ⌀19mm Drill Bit 4.0AhMULTI VOLT Battery Approx. 46 Holes per Charge ⌀25mm Drill Bit Approx. 26 Holes per Charge ⌀32mm Drill Bit Approx. 15 Holes per Charge Concrete Demolishing Approx. 10.8 mins per Charge The values are shown for reference purposes and may vary according to materials and conditions. IP56 Dust and Water Resistant* Thanks to the unique design of dust-protective cooling windows and fully plastic coating on some important inner parts, this product conforms to IP56 protection class ratings (dust and water resistance) for electrical equipment as stipulated by the international IEC regulations.   The equipment has been designed to withstand the effects of dust and water, but there is no guarantee that it will not malfunction. Do not use or leave the equipment in locations where it is subject to excessive amounts of dust, or in locations where it is submerged in water or subject to rainwater. (Only the main unit conforms to the IP56 protection class ratings when equipped with a battery.) Specifications Model WR36DA WR36DB Capacity Bolt M12 – M30 (15/32″ – 1-3/16″) High Tension Bolt M10 – M24 (3/8″ – 15/16″) Square Drive 19mm (3/4″) 12.7mm (1/2″) Tightening Torque 1,100Nm (812ft-lbs.) 1,050Nm (775ft-lbs.) Battery Voltage 36V No Load Speed High Mode 0 – 1,500/min Medium Mode 0 – 1,200/min Low 2 Mode 0 – 900/min Low 1 Mode 0 – 600/min Impact Rate High Mode 0 – 2,900/min 0 – 2,800/min Medium Mode 0 – 2,300/min Low 2 Mode 0 – 1,800/min Low 1 Mode 0 – 1,200/min Overall Length 221mm (8-45/64″) Weight*1(Battery included) 3.7kg (8.2lbs.) Vibration Total Values(triax vector sum)*2 Vibration emissionvalue ah = 15.4m/s2Uncertainty K = 1.5m/s2 Vibration emissionvalue ah = 14.8m/s2Uncertainty K = 1.5m/s2 Standard Accessories*3 2 Batteries (BSL36A18), Charger (UC18YSL3), Battery Cover, Carrying Case According to EPTA-Procedure 01/2003. Vibration total values (triax vector sum) determined according to EN60745. Standard accessories vary by country or area. Please contact local dealers for product availability and product details. New Products Li-ion Cordless Tools Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Brushless Motor Tools DC (cordless) AC (corded) DC (cordless) AC (corded) Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting DC (cordless) AC (corded) DC (cordless) AC (corded) Drilling Demolishing Drilling Demolishing Global Network Technical Service & Support Global Network Technical Service & Support BEWARE OF NON-US SPECIFICATION PRODUCTS IN THE US BEWARE OF NON-US SPECIFICATION PRODUCTS IN THE US Digital Catalog All Posts Digital li-ion Uncategorized   Back abc Digital Catalog

WR36DA

MULTI VOLT(36V) Cordless Impact Wrenches WR36DA WR36DA19mm(3/4″) Square Drive The combination of the high power output MULTI VOLT battery and high efficiency brushless motor delivers power and torque equivalent to an electric (AC) model*1 Tightening Torque*2   When tightening a M30 high-tension bolt using a hex. socket for 3 seconds. Nut-Busting Torque*2   WR36DA: 1,800NmWR36DB: 1,650Nm Runtime per Charge*2（With the BSL36A18 battery）When tightening M24 x 80 high-tension bolts (3 sec. per bolt) WR36DA: Approx. 95 high-tension boltsWR36DB: Approx. 100 high-tension bolts Compared to the WR25SE corded impact wrench. The values are for reference purposes. They vary depending on the material and operating conditions. Compact and Lightweight for Ease of Use Compact and Lightweight for Ease of Use Tightening Mode Settings Mode Low1 Low2 Medium High Tightening ModeIndicator Lamp Applications Light Load Middle Load Heavy Load Car maintenance/Erecting and dismantling scaffolding Bolting and unboltingpipe flanges/Assembly of conveyors Bolting steel beams/Heavy equipment maintenance The tightening torque depends on the material, size and class of the bolt. Make a test fastening to adjust the mode setting to suit the bolt. Compact and Lightweight for Ease of Use Work Ah Performance per Charge* Concrete Drilling(60mm in Depth) ⌀19mm Drill Bit 4.0AhMULTI VOLT Battery Approx. 46 Holes per Charge ⌀25mm Drill Bit Approx. 26 Holes per Charge ⌀32mm Drill Bit Approx. 15 Holes per Charge Concrete Demolishing Approx. 10.8 mins per Charge The values are shown for reference purposes and may vary according to materials and conditions. IP56 Dust and Water Resistant* Thanks to the unique design of dust-protective cooling windows and fully plastic coating on some important inner parts, this product conforms to IP56 protection class ratings (dust and water resistance) for electrical equipment as stipulated by the international IEC regulations.   The equipment has been designed to withstand the effects of dust and water, but there is no guarantee that it will not malfunction. Do not use or leave the equipment in locations where it is subject to excessive amounts of dust, or in locations where it is submerged in water or subject to rainwater. (Only the main unit conforms to the IP56 protection class ratings when equipped with a battery.) Specifications Model WR36DA WR36DB Capacity Bolt M12 – M30 (15/32″ – 1-3/16″) High Tension Bolt M10 – M24 (3/8″ – 15/16″) Square Drive 19mm (3/4″) 12.7mm (1/2″) Tightening Torque 1,100Nm (812ft-lbs.) 1,050Nm (775ft-lbs.) Battery Voltage 36V No Load Speed High Mode 0 – 1,500/min Medium Mode 0 – 1,200/min Low 2 Mode 0 – 900/min Low 1 Mode 0 – 600/min Impact Rate High Mode 0 – 2,900/min 0 – 2,800/min Medium Mode 0 – 2,300/min Low 2 Mode 0 – 1,800/min Low 1 Mode 0 – 1,200/min Overall Length 221mm (8-45/64″) Weight*1(Battery included) 3.7kg (8.2lbs.) Vibration Total Values(triax vector sum)*2 Vibration emissionvalue ah = 15.4m/s2Uncertainty K = 1.5m/s2 Vibration emissionvalue ah = 14.8m/s2Uncertainty K = 1.5m/s2 Standard Accessories*3 2 Batteries (BSL36A18), Charger (UC18YSL3), Battery Cover, Carrying Case According to EPTA-Procedure 01/2003. Vibration total values (triax vector sum) determined according to EN60745. Standard accessories vary by country or area. Please contact local dealers for product availability and product details. New Products Li-ion Cordless Tools Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Brushless Motor Tools DC (cordless) AC (corded) DC (cordless) AC (corded) Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting DC (cordless) AC (corded) DC (cordless) AC (corded) Drilling Demolishing Drilling Demolishing Global Network Technical Service & Support Global Network Technical Service & Support BEWARE OF NON-US SPECIFICATION PRODUCTS IN THE US BEWARE OF NON-US SPECIFICATION PRODUCTS IN THE US Digital Catalog All Posts Digital li-ion Uncategorized   Back abc Digital Catalog