WH18DC

18V Cordless Impact Driver WH18DC Specifications and others Runtime per Charge Specifications Leaflet(PDF) Fast Driving Speed Triple Hammer Design Max Tightening Torque : 210Nm* Head Length : 114mm 1.6kg (with BSL36A18 Battery) When tightening an M16 (Grade 10.9) bolt for three seconds with a hexagonal socket (40mm in overall length) attached. Triple LED Lights for Superior Visibility Three LED lights illuminate a wide area without shadows getting in the way. 5 Tightening Modes for Various Applications Works Well at Low Speeds Both cordless impact drivers stay running at low speeds and are suitable for delicate work. Highly Responsive Trigger Switch Along with a low minimum speed of 100RPM, the trigger with less play in it than a conventional one is more responsive and easier to control. IP56 Dust and Water Resistant* Thanks to the unique design of dust-protective cooling windows and fully plastic coating on some important inner parts, this product conforms to IP56 protection class ratings (dust and water resistance) for electrical equipment as stipulated by the international IEC regulations.   The equipment has been designed to withstand the effects of dust and water, but there is no guarantee that it will not malfunction. Do not use or leave the equipment in locations where it is subject to excessive amounts of dust, or in locations where it is submerged in water or subject to rainwater. (Only the main unit conforms to the IP56 protection class ratings when equipped with a battery.) Runtime per Charge* Work Ah Runtime per Charge Wood Screws ø4.3 × 65mmWood screws into lauan without pilot holes 5.0Ah Approx. 760 Wood Screws per Charge ø5.5 × 90mmWood screws into lauan without pilot holes 5.0Ah Approx. 460 Wood Screws per Charge Machine Screws M8 × 16L 5.0Ah Approx. 4,200 Screws per Charge The values are shown for reference purposes and may vary according to materials and conditions. Specifications Capacity Small Screw 4 – 10mm Ordinary Bolt 5 – 18mm High Tension Bolt 5 – 14mm Self Drilling Screw ⌀3.5 – ⌀6mm Drive 6.35mm Max. Tightening Torque*1 210Nm Battery Voltage 18V No Load Speed Soft Mode 0 – 900/min Power Mode 0 – 3,400/min Bolt Mode 0 – 2,900/min Bolt Single Mode 0 – 2,900/min Self Drilling Screw Mode 0 – 3,700/min Impact Rate Soft Mode 0 – 1,900/min Power Mode 0 – 4,000/min Bolt Mode 0 – 4,000/min Bolt Single Mode 0 – 4,000/min Self Drilling Screw Mode 0 – 2,100/min Overall Head Length 114mm Weight*2 1.6kg (with BSL36A18 / BSL1850MA) 1.9kg (with BSL36B18)*3 Standard Accessories*4 2 Batteries (BSL36A18 / BSL1850MA), Charger (UC18YSL3), Hook, Battery Cover, Carrying Case When tightening an M16 high-tension bolt (Grade 10.9) for three seconds with a socket adapter and a hexagon socket (40mm in overall length) attached. Weight: according to EPTA-Procedure 01/2014. Sold separately. Standard accessories vary by country or area. PDF :  1,366KB Please contact local dealers for product availability and product details. New Products Li-ion Cordless Tools Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Brushless Motor Tools DC (cordless) AC (corded) DC (cordless) AC (corded) Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting DC (cordless) AC (corded) DC (cordless) AC (corded) Drilling Demolishing Drilling Demolishing Global Network Technical Service & Support Global Network Technical Service & Support Digital Catalog All Posts Digital li-ion   Back abc Digital Catalog

DN18DSL

18V Cordless Angle Drill DN18DSL Keyless chuck / Keyed chuck Most compact head in its class* 2 chuck types (keyless chuck and keyed chuck) are available Ideal for drilling and screwing in narrow spaces.Eqquipped with keyless chuck, a drill bit can be easily replaced by holding the main unit with one hand while turning the sleeve with the other hand. As of June 2014. Among the 18V cordless angle drills made by leading power tool manufacturers (surveyed by Koki Holdings.) Convenient Continuous Operation Function (only available for Hammering mode) Working capacity (drilling) per charge *[ Wood drill : ø28mm / Material : SPF lumber, 38mm in thickness ]   The values are for purpose of reference. They may vary according to the drilled material and operating conditions. Highly functional Large paddle trigger switch The rotational speed of the drill can be controlled by varying the amount that the trigger switch is pulled.When releasing the trigger switch, the brake will be applied for immediate stopping. For illuminating work surface LED light The LED Light automatically keeps on lighting while the trigger switch is being pulled Side handle can be installed on both sides Remaining battery indicator lamp The remaining battery level can be checked with a single touch of a button for greater operator convenience. Convenient chuck handle holder (with keyed chuck only) Allows the chuck handle to be kept on the main unit. Specifications Drill Chuck 10mm (3/8″) Keyless 10mm (3/8″) Keyled Capacity: Mild Steel 10mm (3/8″) Capacity: Soft Wood 28mm (1-3/32″) Capacity: Wood Screw (D x L) 5.1 x 38mm (#11 x 1-1/2″) Battery Voltage 18V No Load Speed 0 – 1,800/min. Overall Length 326mm (12-7/8″) 314mm (12-3/8″) Weight * 1.7kg (3.8 lbs.) with BSL1815X / BSL1825 Standard Accessories 2 Batteries (BSL1815X or BSL1825 or BSL1830 or BSL1850), Charger (UC18YKSL or UC18YFSL), Side Handle, Battery Cover, Carrying Case, Chuck Handle (with keyed chuck only) According to EPTA-Procedure 01/2003 Charging Time for Compatible Batteries Battery Type Voltage Type Capacity*1 CoolingWindows UC18YGSLUC18YKSL UC18YRSL*2UC18YFSL*2 UC18YML2*2(AC/DC)*3 18V BSL1815 1.5Ah ● 40min. 22min. 22/60min BSL1815X 1.5Ah ● 40min. 22min. 22/60min BSL1820 2.0Ah ● 60min. 30min. 30/80min BSL1825 2.5Ah ● 75min. 35min. 35/100min BSL1830 3.0Ah ● 90min. 45min. 45/120min BSL1840 4.0Ah ● 120min. 60min. 60/160min BSL1850 5.0Ah ● 150min. 75min. 75/200min The figures of battery capacity are nominal values. With cooling fan. Two-way AC/DC charger usable with in-car power source.   Note: Manufacturer reserves the right to change specifications of parts and accessories without notice. Specifications and standard accessories may vary from country to country. Please contact local dealers for product availability and product details. New Products Li-ion Cordless Tools Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Brushless Motor Tools DC (cordless) AC (corded) DC (cordless) AC (corded) Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting DC (cordless) AC (corded) DC (cordless) AC (corded) Drilling Demolishing Drilling Demolishing Global Network Technical Service & Support Global Network Technical Service & Support Digital Catalog All Posts Digital li-ion   Back abc Digital Catalog

DV18DD

18V Cordless Impact Driver Drill DV18DD Specifications and others Specifications Leaflet(PDF) Extremely Compact & Lightweight A compact, lightweight design allows for working in confined spaces and in various positions with ease, comfort, and control. Fast & Powerful with Highly Efficient Brushless Motor Runtime per Charge* (with BSL1815 battery)   Values shown are for reference purposes and may vary according to the workpiece materials and other operating conditions. Specifications Capacity Machine Screw 6mm Wood Screw 6mm dia. x 75mm Mild Steel (1.6mm thick) 13mm Wood (18mm thick) 36mm Brick 13mm Torque Hard 55Nm Soft 26Nm Chuck Capacity 2 to 13 mm Battery Voltage 18V No Load Speed High 0 – 1,700/min Low 0 – 440/min Impact Rate High 0 – 25,500/min Low 0 – 6,600/min LED Light Yes Overall Length 170mm Weight *1 1.3kg (with BSL1815 / BSL1830C)1.4kg (with BSL1850C) Standard Accessories *2 2 Batteries (BSL1815/BSL1830C/BSL1850C), Charger (UC18YKSL/UC18YFSL), Battery Cover, Carrying Case Weight according to EPTA-Procedure 01/2014. Standard accessories vary by country or area. PDF :  2,043KB Please contact local dealers for product availability and product details. New Products Li-ion Cordless Tools Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Brushless Motor Tools DC (cordless) AC (corded) DC (cordless) AC (corded) Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting DC (cordless) AC (corded) DC (cordless) AC (corded) Drilling Demolishing Drilling Demolishing Global Network Technical Service & Support Global Network Technical Service & Support Digital Catalog All Posts Digital li-ion   Back abc Digital Catalog

DS18DD

18V Cordless Driver Drill DS18DD Specifications and others Specifications Leaflet(PDF) Extremely Compact & Lightweight A compact, lightweight design allows for working in confined spaces and in various positions with ease, comfort, and control. Fast & Powerful with Highly Efficient Brushless Motor Runtime per Charge* (with BSL1815 battery)   Values shown are for reference purposes and may vary according to the workpiece materials and other operating conditions. Specifications Capacity Machine Screw 6mm Wood Screw 6mm dia. x 75mm Mild Steel (1.6mm thick) 13mm Wood (18mm thick) 36mm Torque Hard 55Nm Soft 26Nm Chuck Capacity 2 to 13 mm Battery Voltage 18V No Load Speed High 0 – 1,700/min Low 0 – 440/min LED Light Yes Overall Length 157mm Weight *1 1.2kg (with BSL1815 / BSL1830C)1.4kg (with BSL1850C) Standard Accessories *2 2 Batteries (BSL1815/BSL1830C/BSL1850C), Charger (UC18YKSL/UC18YFSL), Battery Cover, Carrying Case Weight according to EPTA-Procedure 01/2014. Standard accessories vary by country or area. PDF :  2,043KB Please contact local dealers for product availability and product details. New Products Li-ion Cordless Tools Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Brushless Motor Tools DC (cordless) AC (corded) DC (cordless) AC (corded) Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting DC (cordless) AC (corded) DC (cordless) AC (corded) Drilling Demolishing Drilling Demolishing Global Network Technical Service & Support Global Network Technical Service & Support Digital Catalog All Posts Digital li-ion   Back abc Digital Catalog

DH18DPA

18V Cordless Rotary Hammer DH18DPA Specifications and others Runtime per Charge Specifications Optional Accessories Leaflet(PDF) Compact, Lightweight, and Well-balanced Users feel less fatigue due to the compact, lightweight and well-balanced design with most of the weight positioned close to the hand.   With BSL1850C Battery (inc. Side Handle) Class-Leading*1 Drilling Speed The DH18DPA is suited for drilling small holes into concrete, completing the job faster than corded counterparts.   Drilling Speed Comparison (approx.)*2Mean index values for drilling into concrete with drill bits between 3.5mm and 10mm in diameter   As of October 2020. Among cordless rotary hammers in the same class (18V DH18DPA [2-mode] : 12 – 18mm) made by leading power tool manufacturers. (Survey by Koki Holdings) The values are shown for reference purposes and may vary according to materials and conditions. Low Vibration Low Vibration Handle (LVH) The low vibration handle provides rubber handle dampers to absorb vibrations and shocks during operation. Vibration Value Comparison (approx.)*Triax Vector Sum (m/s2) The values are shown for reference purposes and may vary according to materials and conditions. Bright LED Light Illuminates the spot you are working on. 2-step Rotation Speed for Different Applications Makes it easy to drill a fragile material by pressing the changeover switch to reduce the rotation speed and impact rate. Built-in Auto Stop Function for Consistently Drilling Holes Once the initial drilling time is recorded on the tool, the motor is designed to automatically stop when the recorded time has passed, enabling a stable and efficient continuous operation. Caution The auto stop function is used to record the drilling time. Thus, it may not provide the same drilling depth owing to the operator position, pushing force, and variation among the workpieces. Please use a depth gauge to ensure the drilling depth. Reactive Force Control Against Sudden Overburdening When the tool bit is suddenly overburdened during operation, the slip clutch works or the built-in controller stops the motor output before the entire tool jerks. Caution Depending on the operating conditions, the Reactive Force Control function may not work or provide the specified performance. Please make sure that the workpiece is placed and supported properly, and that the main unit is held firmly during operation. Runtime per Charge* Work Ah Runtime per Charge* Concrete Drilling (30mm in Depth) Φ 6mm Drill Bit 5.0Ah Approx. 246 Holes Φ 10.5mm Drill Bit 5.0Ah Approx. 138 Holes  The values are shown for reference purposes and may vary according to materials and conditions. Specifications Capacity Concrete 18mm Steel 13mm Wood 18mm Battery Voltage 18V Bit Shank SDS-plus Impact Energy*1 1.3J No Load Speed Normal 0 – 1,080/min Low 0 – 800/min Full Load Impact Rate Normal 0 – 5,500/min Low 0 – 4,100/min Overall Length 252mm Weight*2 2.1 – 2.7kg*32.3kg (with BSL1850C) Vibration Total Values (triax vector sum) *4 Hammer Drilling into Concrete Vibration emission value ah, HD = 9.9 m/s2 Uncertainty K = 1.5 m/s2 Standard Accessories *5 2 Batteries (BSL1850C), Charger (UC18YFSL), Side Handle, Depth Gauge, Battery Cover, Carrying Case Impact energy according to EPTA-Procedure 05 (Ver.2.0). Weight according to EPTA-Procedure 01/2014. Weight varies depending on the battery used. 2.7kg with BSL36B18 battery (sold separately). The vibration total values were determined according to EN60745. Standard accessories vary by country or area. Optional Accessories Belt Hook (Optional)   Users can hook the tool to their belt loop when it is not in use.Hook (Code No.372200)Screw (Code No.337357) PDF :  1,238KB Please contact local dealers for product availability and product details. New Products Li-ion Cordless Tools Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Brushless Motor Tools DC (cordless) AC (corded) DC (cordless) AC (corded) Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting DC (cordless) AC (corded) DC (cordless) AC (corded) Drilling Demolishing Drilling Demolishing Global Network Technical Service & Support Global Network Technical Service & Support Digital Catalog All Posts Digital li-ion   Back abc Digital Catalog

C1707DA

18V Cordless Circular Saw C1807DA Specifications and others Specifications Leaflet(PDF) Smooth Cutting The C1807DA is designed to provide smooth cuts, ensuring user comfort. Max Overload Capacity The max overload capacity of C18DBAL is indexed as 100. Up to 1.5 times more overload capacity than the 18V brushless circular saw C18DBAL, when cutting 2″ x 10″ lumber. The values are shown for reference purposes and may vary according to materials and conditions. Designed for a Variety of Applications Featuring HiKOKI’s efficient and powerful brushless motor, the C1807DA exhibits excellent cutting performance in a wide range of applications; It can even easily cut thick wood. Specifications Saw Blade Diameter 190mm Max.Cutting Depth 90° 64.5mm 45° 49mm 55° 39mm Battery Voltage 18V No-load Speed Power Mode 3,800/min Silent Mode 2,000/min Overall Length 317mm Weight*1 3.9kg with BSL1850 battery 4.2kg with BSL36B18 battery*2 Standard Accessories*3 2 Battery (BSL1850), Charger (UC18YFSL), Battery Cover, Saw Blade, Guide, Dust Collector Set, Hex. Bar Wrench 5mm, Stackable Case Weight: According to EPTA-Procedure 01/2014. Sold separately. Standard accessories vary by country or area. PDF :  1,715KB Please contact local dealers for product availability and product details. New Products Li-ion Cordless Tools Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Brushless Motor Tools DC (cordless) AC (corded) DC (cordless) AC (corded) Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting DC (cordless) AC (corded) DC (cordless) AC (corded) Drilling Demolishing Drilling Demolishing Global Network Technical Service & Support Global Network Technical Service & Support Digital Catalog All Posts Digital li-ion   Back abc Digital Catalog

CR18DMA

18V Cordless Reciprocating Saw DH3640DA Features Ultra compact and lightweight design for high flexibility and fatigue free working in narrow spaces and overhead work.   Lowest vibration in its class thanks to user vibration system (UVP) for maximum user comfort.   Four preselectable speed modes and additional variable trigger switch for the right speed for each application.    Toolless blade change for high user comfort. Specifications Max. Cut in Pipe 130mm Max. Cut in Wood 300mm Battery Voltage 18V Length of Stroke 29mm No Load speed: 0 – 3000 /min Variable Speed Yes LED Light Yes Shoe Adjustment Yes Toolless Blade Change Yes Dimensions (L x W x H) 246 x 207 x 87mm Weight 2.5kg CR18DMAW2ZBody onlyBlade for metalWrenchGTIN 4966376304912 PDF :  245KB Please contact local dealers for product availability and product details. New Products Li-ion Cordless Tools Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Brushless Motor Tools DC (cordless) AC (corded) DC (cordless) AC (corded) Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting DC (cordless) AC (corded) DC (cordless) AC (corded) Drilling Demolishing Drilling Demolishing Global Network Technical Service & Support Global Network Technical Service & Support Digital Catalog All Posts Digital li-ion   Back abc Digital Catalog

CR18DA

18V Cordless Reciprocating Saw CR18DA Features Lightweight design can be used in one hand   Compact – only 350mm long   Centre of gravity on handle for reduced fatigue   Tool holder accepts both reciprocating and jigsaw blades   Blades can be fitted facing up or down   Lock-off switch for extra safety   Tool free blade fitting   Tool free shoe adjustment   LED work light Specifications No-load speed 0-3200/min Stroke length 13mm Capacity Pipe: 50mm | mild steel plate: 12mm | wood: 50mm Length 350mm Weight 1.7kg ex battery Standard accessories Blade CR18DAJJZWith 2 x compact 5.0Ah Li-ion batteries, charger & stackable caseGTIN 4966376334063 CR18DAJ4ZBody onlyGTIN 4966376334049 PDF :  338KB Please contact local dealers for product availability and product details. New Products Li-ion Cordless Tools Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Brushless Motor Tools DC (cordless) AC (corded) DC (cordless) AC (corded) Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting DC (cordless) AC (corded) DC (cordless) AC (corded) Drilling Demolishing Drilling Demolishing Global Network Technical Service & Support Global Network Technical Service & Support Digital Catalog All Posts Digital li-ion   Back abc Digital Catalog

CD1805DB

18V Cordless Metal Cutting Saw CD1805DB Maximum Cutting Depth of 57.5mm The CD1805DB metal cutting saw allows a maximum cutting depth of 57.5mm using a 150mm saw blade, capable of making deep cuts and taking on a wide range of cutting jobs. Top-class* Cutting Speed in its Class With the brushless motor which reduces size and weight, while increasing the power and performance, CD1805DB provides significant faster cutting speed than competition models.   As of August 2023, among the 135mm 18V cordless metal cutting saws by leading power tool manufacturers (Surveyed by Koki Holdings).The values are shown for reference purposes and may vary according to the workpiece materials and other operating conditions. Silent Mode for Less Noise and More Comfort The CD1805DB metal cutting saw features a silent mode setting that reduces the motor rotation speed for efficient work with less noise. When the load increases during silent mode, the tool will automatically switch over to Power mode and revert back to Silent mode when the load decreases. Easy-to-empty Transparent Dust Box The one-push button allows for easy and quick removal and cleaning to keep work environment clean and safe. Selectable LED Lighting Mode Select from three modes: ON, Interlocking and OFF. Lighting mode ON Interlocking OFF Indicator lamp Status LED light is on LED light is on while the trigger is pulled LED light is off Overload Protection for User Safety The overload protection functions stops the motor to reduce kickbacks when an overload is detected. Soft Start The soft start function reduces noise and recoil at start-up. Specifications Capacity Blade Dia. 135mm (5-3/8″) to 150mm (5-7/8″) Max Cutting depth 90° 51mm (2″) to 57.5mm (2-17/64″) Type of Motor Brushless Battery Voltage 18V No-Load Speed Power Mode 4,200/min Silent Mode 2,200/min Dimensions (L x W x H) 278 x 177 x 247mm (with BSL36A18X) Weight 3.1kg (6.8 lbs.) (with BSL36A18X) Compatible Battery*1 Multi Volt battery and BSL18XX series Standard Accessories*2 Battery (BSL36A18X), Charger (UC18YFSL), Saw Blade (135mm (5-3/8″)), Wrench, Battery Cover, Carrying Case Existing batteries(BSL3660/3620/3626, etc.) cannot be used with CD1805DB. Standard accessories vary by country or area. Please contact local dealers for product availability and product details. New Products Li-ion Cordless Tools Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Brushless Motor Tools DC (cordless) AC (corded) DC (cordless) AC (corded) Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting DC (cordless) AC (corded) DC (cordless) AC (corded) Drilling Demolishing Drilling Demolishing Global Network Technical Service & Support Global Network Technical Service & Support Digital Catalog All Posts Digital li-ion   Back abc Digital Catalog

CJ18DA

18V Cordless Jig Saw CJ18DA Specifications and others Specifications Leaflet(PDF) Faster Cutting Speed Cutting Speed Comparison HiKOKI’s new cordless Jig Saw, CJ18DA, comes with improvements in the plunger shaft and orbital function to make cutting smoother and easier.MDF 24mm thick, blade No.41,orbital position Ⅲ, maximum speed, 20N of thrust force Smooth Straight and Curved Cuts The new Jig Saws feature a mechanism which allows rigid and stable clamping of the saw blade, leading to smooth straight and curved cuts. Tool-less Blade Change An easy to use, large lever allows quick and easy blade change without a tool. Compact Design Provides easier and more convenient handling compared to previous models. LED Light Illuminates the blade edge. Blower Function Provides a clear view over the cutting line. 4-Stage Orbital Action Allows the user to select the aggressiveness of the cut most suitable for the work material. Specifications Capacity Wood 135mm Mild Steel 10mm Min. Cutting Radius 25mm Max Cutting Angle 45° Right / Left Voltage 18V Stroke 26mm No-Load Speed 0 – 2,500/min Overall Length 266mm Weight*1 2.5kg (with BSL1850C) 2.9kg (with BSL36B18)*2 Vibration*3 7.5 m/s2 (particle board) Standard Accessories*4 2 Batteries (BSL1850C), Charger (UC18YFSL), Blade No.41, Hex. Bar Wrench 4mm, Splinter Guard, Dust Collector (for Europe), Battery Cover, Carrying Case Weight according to EPTA-Procedure 01/2014. Sold separately. The measured values were determined according to EN62841. Standard accessories vary by country or area. PDF :  1,000KB Please contact local dealers for product availability and product details. New Products Li-ion Cordless Tools Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Brushless Motor Tools DC (cordless) AC (corded) DC (cordless) AC (corded) Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting Screw-driving / Drilling Hammer-drilling Screw-driving Fastening Grinding Sanding Cutting DC (cordless) AC (corded) DC (cordless) AC (corded) Drilling Demolishing Drilling Demolishing Global Network Technical Service & Support Global Network Technical Service & Support Digital Catalog All Posts Digital li-ion   Back abc Digital Catalog